26
-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Setting, Tuner Setting,
etc., to select your desired setting.
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
1
Press
MENU
.
2
Select SETUP by sliding your finger on the
GlideTouch bar
to the left or right. Press the
GlideTouch bar
under SETUP.
The main SETUP menu is displayed.
3
Select the desired item by sliding your finger on
the
GlideTouch bar
to the left or right. Press the
GlideTouch bar
under your selection.
GENERAL
↔
TUNER
↔
AUDIO
↔
DISPLAY
↔
DEMO
The SETUP menu of the selected item is displayed.
4
Select the desired item by sliding your finger on
the
GlideTouch bar
to the left or right. Press the
GlideTouch bar
under your selection.
GENERAL
CLOCK
*
1
↔
PLAY MODE
↔
BEEP
↔
INT MUTE
↔
INT AUDIO
↔
AUX IN
↔
(AUX NAME)
*
2
↔
D-AUX
↔
POWER IC
↔
STEERING
TUNER
TUNER MODE
↔
TUNER AREA
*
3
AUDIO
SUBWOOFER
↔
SUBW SYSTEM
*
4
↔
EQ MODE
*
5
↔
TW SETUP
*
6
↔
AP SELECT
DISPLAY
DIMMER
↔
DIMMER LEV
↔
SCROLL TYPE
↔
TEXT SCROLL
↔
LCD CONTRAST
↔
A-LINK TEMP
*
7
↔
AUDIO LEVEL
↔
T.CORR PAR
*
8
DEMO
DEMO
BAND
SOURCE/
POWER
g
f
GlideTouch bar
Rotary encoder
MENU
*
1
Refer to “Setting Time” (page 7).
*
2
Displayed only when AUX is ON.
*
3
Refer to “Changing the Radio Frequencies for each Country”
(page 9)
*
4
Displayed only when SUBWOOFER is ON.
*
5
Refer to “Setting User's EQ mode” (page 15).
*
6
Displayed only when the 2WAY/3WAY switch (pages 39 to 41) is set
to 3WAY.
This function cannot be selected when an external audio processor
is connected.
*
7
“A-LINK TEMP” is displayed when an Amplifier Link compatible
external amplifier is connected.
*
8
Refer to “Setting the Time Correction Unit” (page 20).
5
Change the parameter by pressing the
GlideTouch bar
under the setting desired.
6
After setting, press and hold
MENU
for at least 2
seconds to return to normal mode.
• If
MENU
is pressed while adjusting or setting the itmes in the
MENU mode, the unit will return to the previous selection secreen.
• By pressing the
GlideTouch bar
under RETURN in the MENU
mode, the unit will return to the normal mode.
• If no peration is performed in 60 seconds, the unit will return to the
normal mode.
General Setting
General is selected on the setup main menu in step 3.
Playing MP3/WMA Data (PLAY MODE)
CDDA (Initial setting) / CDDA&MP3/WMA
This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback
may be difficult. For these special cases, you can select playback of
CD data only. When a disc contains both CD or the MP3/WMA data,
playback starts from the CD data portion of the disc.
CDDA
:
Only CD data can be played back.
CDDA&MP3/WMA
: Both CD data and MP3/WMA file tracks
can be played back.
• Perform this setting before inserting a disc. If a disc has already
been inserted, perform the setting after you remove the disc. (If you
use an MP3 changer, you have to change discs.)
Sound (Beep) Guide Function
BEEP ON (Initial setting) / BEEP OFF
This function will give audible feedback with varying tones
depending upon the button pressed.
Turning Mute Mode On/Off
INT MUTE ON (Initial setting) / INT MUTE OFF
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device.
Setting Tone Defeat for External Devices
INT AUDIO ON / INT AUDIO OFF (Initial setting)
When inputting external devices to this unit, turning tone defeat on
will bypass EQ and MX, i.e., sound for external devices is output at
the default setting.
