CPCI-QIPC REFERENCE MANUAL
ALPHI TECHNOLOGY CORP.
Page 14
Ver 1.1
Part Number :
739-11-000-4000
Copyright ALPHI Technology Corporation ,1998
5. LED INDICATORS
There are six LED indicators visible at the CPCI card bracket. They are marked with a
legend on the bracket.
The LEDs have the following meanings:
LEGEND
Meaning
LEGEND
Meaning
D
DSP is accessing IP D.
C
DSP is accessing IP C.
R
DSP is reading a
register in the AMCC.
W
DSP is writing a
register in the AMCC.
B
DSP is accessing IP B.
A
DSP is accessing IP A.
Table 5.1 LED Descriptions
6. CONNECTIONS
6.1 IP I/O CONNECTORS
50 pin subminiature D shelled connectors are used to route all the IP I/O signals off the
card. ALPHI Technology can supply transition modules and cable assemblies to meet any
special requirements. Contact the factory for additional information.
Connectors are manufactured by AMP and the style is CHAMP.
Use
Model
On PC Board
787096-1
Suggested Plug
787131-1
Suggested Shell
787133-2
Table 6.1: I/O Connector Model Numbers
1
25
26
50
Figure 6.1: IP I/O CONNECTORS
The I/O signals for all four IPs are directly routed off the card through the front panel.
6.2 SERIAL RS232 PORT (P4)
A 9 pin subminiature D shelled connector is used to route the RS232 signals off the card.
Port A of the 8530 is configured as the RS232 port, and it serves as the console output for
