Allmand Maxi-Power MP65 T4F, Operator'S Manual

Page: 22 / 76

Not for
Reproduction
22 ALLMAND.COM
Operation
30
Coolant
Coolant freezing could cause cracks of cylinder and radiator. Be sure to always use mixture of LLC
(
long-life coolant / antifreeze) and soft water (like tap water) of good quality.

When water with dirt, sand, or dust, or hard water such as well water (ground water) is used, deposits
can form inside the radiator or on the cylinder head and resulting in engine overheat from poor coolant
flow.

Adjust mixing ratio of coolant according to the temperature. (55% volume coolant is filled when the unit is
shipped from factory.) Use coolant within the range of its mixing ratio between 30 and 60%.
(If LLC (antifreeze) exceeds more than 60%, it may decrease its antifreezing effect.)
Mixing ratio of LLC (antifreeze) (reference)
Outside temperature (°F) 5 -4 -13 -22 -31 -40 -49
Outside temperature (°C) -15 -20 -25 -30 -35 -40 -45
Mixing ratio (%) 30 35 40 45 50 55 60

Dispose of LLC (Antifreeze) in accordance with local laws and regulations..
Fuel

Never use fuel with sulfur content greater than 0.0015% (15 ppm).

Use only ultra-low sulfur fuel.

Use such diesel fuel which conforms to either standard EN590 or ASTM D975.

Disposing of fuel must be in accordance with all applicable regulations.

Diesel fuel is required to meet the following conditions.
- Free from even minute dust particles
- High optimum viscosity
- High cetane number (more than 45)
- High fluidity even at low temperature
- Low carbon residue content