Allied Hy-Ram HR270, Safety, Operation And Maintenance Instructions, Page: 9 / 60

Allied Construction Products, LLC www.alliedcp.com
SOMM577202_14mar
viii
Table of Contents
Section Pg.
Record of Document Revisions……………….… i
Safety Information.…………………………………. ii
Safety Statements and Hazard Alerts……………… ii
Purpose of Safety Messages……….……………… ii
Safety Alert Symbol...…………..…………………… ii
Signal Words………………………………………… ii
Non-Hazard Signal Words………….………………. ii
Safety, Information & Identification Labels……….. iii
Meaning of Pictograms ..…………………………… v
General Safety Precautions………........................ vi
Qualified Person…………….…..………………….. vi
General Construction Safety……….…. vi
Federal, State, Local and OSHA Construction
Guidelines and Regulations……………….………..
vi
Owner’s Responsibilities……….….………………. vi
Operational Safety Program……………………….. vii
Protective Equipment – PPE and Guarding vii
Unapproved Modifications………………………….. vi
Table of Contents……..……................................ viii
List of Figures…..…………………………………… x
1.0 Introduction & Scope.…………………………. 1
1.1 Purpose of This Manual………………………… 1
1.2 About This Manual……………..................... 1
1.3 How to Order Replacement Publications…… 1
1.4 Related Publications….…………....................... 1
2.0 Equipment Identification…………….………... 3
2.1 Serial Number Location.………..………………. 3
2.2 Equipment Identification Tag….………………. 3
2.3 Record Equipment Information.……………….. 3
3.0 Warranty Protection Summary…………..…… 4
3.1 Overview…….……………….…………………….. 4
3.2 Owner’s Responsibilities……..…........................ 4
3.3 Allied Product Policies……………...................... 5
Section Pg.
4.0 Product Information…………………..…….….. 6
4.1 Description and Use……………………..…….. 6
4.2 Familiarization of Main Components………... 6
4.3 Principle of Operation……………………..……. 6
5.0 Sizing the Breaker…...………………………… 8
5.1 Breaker Selection - General……………………. 8
5.2 Auxiliary Circuits & Conversion Kits…………… 8
6.0 Operation….……………………………...……… 10
6.1 Before the Breaker is Used……………….…….. 10
6.1.1 Pre-Operation Inspection…..…………………. 10
6.2 Proper Operation and Use………………….…... 10
6.2.1 Operating (Cycle) Time - Max.………………. 11
6.3 Operating Mistakes to Avoid…………………… 11
6.3.1 Recognize Changes in Pitch or Frequency.. 11
6.3.2 Do Not Pry with Breaker……………………… 12
6.3.3 Do Not Drop or Hack at the Material………… 12
6.3.4 Do Not Operate With Cylinders At Stroke End 12
6.3.5 Other Operating Mistakes to Avoid………… 13
6.4 Special Applications & Operating Conditions 13
6.4.1 Working Underwater…………………….…….. 13
6.4.2 Working Underground……………………..…… 14
6.4.3 Working in Hot Temperatures……………….... 14
6.4.4 Working in Cold Temperatures........................ 14
6.4.5 Flow Adjustment……………………..……….. 15
7.0 Care and Maintenance………………………... 16
7.1 Inspection & Maintenance Schedule…………. 16
7.2 Equipment Maintenance Log…………………... 17
7.3.1 Housing Box Inspection ……………………. 17
7.3.2 Vibration Dampening Parts Inspection….….... 17
7.4 Front Head – Description of Parts…..………..…. 18
7.4.1 Front Head Inspection…………………………. 18
7.4.2 Measure Gap Between Tool & Bushing …… 19