Allied Construction Products, LLC www.alliedcp.com
SOMM577202_14mar
33
10.0 Changing the Tool – [cont’d]
10.5 Tool Re-Lubrication – AutoLube Options
As an option, Allied offers automatic grease
dispensing systems that provide continuous re-
lubrication of the tool and bushings during operation.
When installed correctly and properly maintained,
automatic lubricators provide the following benefits-
Higher
utilization
rate of breaker
Extend service life of tool and bushings
Reduced
grease
waste
A choice of carrier and breaker mounted models is
available.
IMPORTANT
The AutoLube can be used with any breaker
having the necessary connection port. Available
on Hy-Ram models HR290-HR710.
10.5.1 Carrier Mounted Lubricator - CML Series
Fig 10-11 Carrier Mounted AutoLube System
The CML series AutoLube is designed for mounting
on the carrier. It features a large refillable reservoir
with a shut off switch that immobilizes the breaker
and signals the operator when the reservoir reaches
the low level mark. The electric motor can drive up to
three pumping elements.
The CML series is highly configurable to suit virtually
any size breaker. Allied offers kits to help facilitate
the installation. Components of each kit, such as the
number of pumping elements and lube lines, are
coordinated with the size of the breaker and carrier
combination. Universal kits are also available for non-
Allied breakers. When ordering kits, it is necessary to
provide the make and model of the carrier and
breaker.
10.5.2 Hammer Mounted Lubricator – HML Series
The AutoLube HML-series is a compact size pump
that mounts directly to the breaker. There are no
electric or hydraulic connections. Grease is
dispensed when the pump is pulsated by the breaker.
The refillable reservoir is transparent and allows easy
monitoring. Delivery is adjustable to match different
size breakers and requires no special tools.
Fig 10-12 Hammer Mounted AutoLube System
Installation kits for both the CML-series and HML-
series are available from Allied. These kits do not
include Chisel paste. Order separately.
10.6 Benefits of Using Chisel Paste
Allied Chisel Paste is a specialty lubricant made for
use with all breakers. Developed exclusively for
bushing and tools, chisel paste (when applied
regularly) offers supreme protection against friction-
related wear from heavy-loading.
Chisel Paste is specially formulated from a unique
blend of lubricants that also include solids of
molybdenum disulfide [MoS2], graphite and copper.
These solids (typically not found in General Purpose”
and “Multi-Purpose” grease) are key elements of
Chisel Paste that help extend the service life of
bushings and tools.
IMPORTANT
Pre-lubricate the tool before inserting into front
head. Keep dirt and rocks from contaminating
grease. If Allied Chisel Paste is not used, re-
lubrication frequency must be increased. Use high-
quality EP type grease that contains a high
percentage of molybdenum disulfide [MoS2] and
formulated for use in high-temperature applications.
Summary of Contents for Hy-Ram HR270
Page 60: ...SOMM57720214mar R ...