Allied Telesis AT-S80, User Manual

Page: 33 / 346

AT-S80 Management Software User’s Guide
Section I: Using the Menus Interface 33
2. From the Basic Switch Configuration Menu, type I to select System IP
Configuration .
The System IP Configuration Menu is shown in Figure 5.
Figure 5. System IP Configuration Menu
The top portion of the menu displays the current IP address, subnet
mask, and gateway address for the switch. The menu displays the
switch’s MAC address, which cannot be changed. The menu also
displays the current status of the DHCP client on the switch.
The Enable/Disable DHCP Mode option is described in “Enabling and
Disabling the DHCP Client” on page 35.
3. To set the switch’s IP address, do the following:
a. Type I to select Set IP Address .
The following prompt is displayed:
Enter new IP address>
b. Type the IP address for the switch and press Enter.
4. To set the switch’s subnet mask, do the following:
a. Type M to select Set Subnet Mask .
The following prompt is displayed:
Enter new subnet mask>
Basic Switch Configuration -> System IP Configuration Menu
MAC Address: 00:06:5H:B2:65:84
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Mode: Disabled
----------------------- <COMMAND> -----------------------------
Set [I]P Address
Set Subnet [M]ask
Set Default [G]ateway
Enable/Disable [D]HCP Mode
[Q]uit to previous menu
Command>