Allied Telesis AT-S80, User Manual

Page: 312 / 346

Chapter 33: 802.1x Port-based Network Access Control Feature
312 Section II: Using the Web Browser Interface
Configuring 802.1x Port-based Network Access Control Feature
To configure the 802.1x Port-based Network Access Control feature,
perform the following procedure:
1. From the bookmarks on the left side of the page, click Security.
The Security folder expands.
2. From the Security folder, select Port Access Control .
The 802.1x Access Control Configuration Page is shown in Figure 90.
Figure 90. 802.1x Access Control Configuration Page
Note
The Initialize and Re-auth Initialize parameters are described in
Steps 5 and 6, respectively.
3. To select a port, click the Port field and select the port you want to
configure from the pull-down menu. You can configure only one port at
a time.
The current settings for the selected port are displayed.