Allied Telesis AT-S80, User Manual

Page: 228 / 346

Chapter 21: Basic Switch Parameters
228 Section II: Using the Web Browser Interface
Configuring System Administration Information
This section explains how to enable password protection and create users
in the web interface. See the following sections:
ˆ
“Adding System Administration Information” on page 228
ˆ
“Modifying Administration Information” on page 229
ˆ
“Deleting Administration Information” on page 230
Adding System
Administration
Information
To set a switch’s administration information, perform the following
procedure:
1. From the book marks on the left side of the page , select System .
The System folder expands.
2. From the System folder, select Administration .
The Administration Page is shown in Figure 58.
Figure 58. Administration Page
3. To enable or disable password protection, select Enable or Disable
from the pull-down menu next to the Password Protection field.
You can control login authentication by enabling password protection
which requires a user to supply a password when logging onto the
switch. If you disable password protection, a user can login without
inputting a password. By default, this field is set to Enable.
4. To create an entry number, type 1 through 8 in the box next to the
Entry number field.