Allied Telesis AT-S80, User Manual

Page: 36 / 346

Chapter 3: Basic Switch Parameters
36 Section I: Using the Menus Interface
Configuring System Administration Information
This section explains how to assign a name to the switch. It also explains
how to specify the location of the switch and the name of the switch’s
administrator. Entering this information is optional.
To set a switch’s administration information, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration .
The Basic Switch Configuration Menu is shown in Figure 4 on page 32.
2. From the Basic Switch Configuration Menu, type A to select System
Administration Information .
The System Administration Configuration Menu is shown in Figure 6.
Figure 6. System Administration Configuration Menu
The Description parameter displays the model name of the switch. It
cannot be changed.
3. To set the system’s name, do the following:
a. Type N to select Set System Name .
The following prompt is displayed:
Enter system name>
Basic Switch Configuration -> System Admin. Configuration Menu
Description: AT-FS750/16
Object ID:
Name:
Location:
Contact:
----------------------- <COMMAND> -----------------------------
Set System [N]ame
Set System [L]ocation
Set System [C]ontact Information
[Q]uit to previous menu
Command>