Allied Telesis AT-S80, User Manual

Page: 65 / 346

AT-S80 Management Software User’s Guide
Section I: Using the Menus Interface 65
The Trunk Configuration Menu is shown in Figure 15.
Figure 15. Trunk Configuration Menu
3. From the Trunk Configuration Menu, type A to select Add Trunk
Member .
The following prompt is displayed:
Enter trunk group number>
4. Select a trunk group number from 1 to 7 and press Enter.
The following prompt is displayed:
Enter port members (up to 8 ports) for trunk
n
>
5. Enter the ports you want to include in the trunk and press Enter.
You can specify the ports individually separated by commas (for
example, 1,2,5), as a range of ports separated by a hyphen (for
example, 2-4), or both (for example, 4,6,11-14).
6. Type S to select Set Trunk Status .
The following prompt is displayed:
Enter trunk group number>
7. Type the trunk group number and press Enter.
AT-FS750/24 Local Management System
Advanced Switch Configuration -> Trunk Configuration Menu
Group Status Port Members Trunk ID
------- -------------- --------------------- ----------
1 Disabled 1
2 Disabled 2
3 Disabled 3
4 Disabled 4
5 Disabled 5
6 Disabled 6
7 Disabled 25, 26 7
----------------------- <COMMAND> -----------------------------
[A]dd Trunk Member
[S]et Trunk Status
[R]emove Trunk Member [Q]uit to previous menu
Command>