Allied Telesis AT-S80, User Manual

Page: 307 / 346

AT-S80 Management Software User’s Guide
Section II: Web Browser Interface 307
6. In the Path Cost column for the port you want to configure, type a
number for the Path Cost.
Path cost is described in “Path Costs and Port Costs” on page 151.
7. Click Apply .
8. To configure all of the ports to the same settings, in the All row,
configure one, two, or all of the following settings: STP Status, Priority,
and Path Cost. Then click
Apply .
Configuring the
Advanced RSTP
Port Settings
To configure the advanced RSTP port settings, perform the following
procedure:
1. From the bookmarks on the left side of the page, select Bridge .
The Bridge folder expands.
2. From the Spanning Tree folder, select Spanning Tree.
The Spanning Tree folder expands.
3. From the Spanning Tree folder, select RSTP Advanced Port .