Allied Telesis AT-S80, User Manual

Page: 40 / 346

Chapter 3: Basic Switch Parameters
40 Section I: Using the Menus Interface
This parameter applies to a local management session but not to a
remote web management session. A web browser management
session remains active so long as your web browser is open.
Note
If you select 0, you must always remember to properly log off from a
local management session when you are finished to prevent
blocking future management sessions with the switch.
4. To enable or disable the web server, do the following:
a. Type W to select Enable/Disable Web Server .
The following prompt is displayed:
Enable or Disable web server (E/D)>
b. Type E to enable the web server or D to disable it. The default is
enabled. If you disable the web server, you can not manage the
switch from a remote management station using a web browser.
5. To enable or disable an SNMP agent, do the following:
a. Type S to select SNMP Agent .
The following prompt is displayed:
Enable or Disable SNMP agent (E/D)
b. Type E to enable an SNMP agent or D to disable the SNMP agent.
6. To add a new user and password, do the following:
a. Type A to select Add Administrator .
The following prompt is displayed:
Enter entry number>
b. Enter the number of the user name. You can select numbers 2
through 8.
The following prompt is displayed:
Enter new user name>
c. Enter the name of a user.
The following prompt is displayed:
Enter new password>