Allied Telesis AT-S80, User Manual

Page: 280 / 346

Chapter 29: Virtual LANs
280 Section II: Using the Web Browser Interface
Creating a Port-Based VLAN
To create a port-based VLAN, perform the following procedure:
1. From the bookmarks on the left side of the page, select Bridge .
The Bridge folder expands.
2. From the Bridge folder, select VLAN .
The VLAN folder expands.
3. From the VLAN folder, select Port-Based VLAN .
The Port-Based VLAN Page is shown in Figure 79.
Figure 79. Port-Based VLAN Page
4. To assign a VLAN ID, type a VLAN ID in the VLAN ID field.
You can choose a value between 2 and 4,000.
5. To assign a name to a VLAN, type in a name in the VLAN Name field.
6. To assign ports to the VLAN, click on the port numbers labeled either
Static Tagged or Static Untagged. Then click Apply .