Allied Telesis AT-9400 Page 622 User Manual Download | Manualshive

Page: 622 / 668

background image

Chapter 34: PKI Certificates and SSL

622

Section IX: Management Security

Deleting a Certificate

The procedure in this section deletes a certificate from the certificate
database. Please note the following before performing this procedure:

Deleting a certificate from the database does not delete it from the
switch. It continues to reside in the AT-S63 file system. To completely
remove a certificate from the switch, you must also delete it from the
file system. For instructions, refer to “Deleting a System File” on
page 158.

You cannot delete a certificate from the database if its corresponding
encryption key is the active key in the web server configuration. The
switch will consider the certificate as in use and will not allow you to
delete it. You must first configure the web server with another
encryption key pair for a different certificate. For instructions, refer to
“Configuring the Web Server” on page 590.

To delete a certificate from the certificate database, perform the following
procedure:

1. From the Main Menu, type

7

to select Security and Services.

2. From the Security and Services menu, type

7

to select Keys/

Certificates Configuration.

The Keys/Certificates Configuration menu is shown in Figure 221 on
page 596.

3. From the Keys/Certificate menu, type

3

to select Public Key

Infrastructure (PKI) Configuration.

The Public Key Infrastructure (PKI) Configuration menu is shown in
Figure 227 on page 613.

4. From the Public Key Infrastructure (PKI) Configuration menu, type

2

to

select X509 Certificate Management.

The X509 Certificate Management menu is shown in Figure 228 on
page 613.

5. From the X509 Certificate Management menu, type

3

to select Delete

Certificate.

The following prompt is displayed:

Enter certificate name (ALL - delete all) ->

6. Enter the name of the certificate you want to delete. (This field is case

sensitive.) To delete all the certificates, enter ALL.

«
...
620
621
622
623
624
...
»

Summary of Contents for AT-9400





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-9400

Brand: Samsung Pages: 16

SCX 4826FN - Laser Multi-Function Printer

Brand: Samsung Pages: 16

SENTINEL 6.1.1.0 - README

Brand: Novell Pages: 13

Electric Bass Vol. 1—Rock

Brand: M-Audio Pages: 4

UPGRADE FIRMWARE MODEM ROUTER

Brand: Belkin Pages: 1

D-NE1 - Portable Cd Player

Brand: Sony Pages: 2

Street Atlas USA 2011

Brand: DeLorme Pages: 265

Brand: Ulead Pages: 100

CERTIFICATE SYSTEM 8 - DEPLOYMENT

Brand: Red Hat Pages: 132

Ramp Preview Controller

Brand: ARRI Pages: 46

Brand: Denon Pages: 29

DriverScanner 2010

Brand: UNIBLUE Pages: 12

Brand: Picsel Pages: 23

EASYGSM GH68-60751A

Brand: Samsung Pages: 14

ThinkCentre A52

Brand: Lenovo Pages: 114

VFABRIC TC SERVER

Brand: VMware Pages: 2

VCENTER APPLICATION DISCOVERY MANAGER 6.0

Brand: VMware Pages: 12

VCLOUD SDK FOR JAVA 1.0 - DEVELOPER S GUIDE

Brand: VMware Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands