manualshive.com logo in svg

Allied Telesis AT-9400, User Manual

The Allied Telesis AT-9400 is a versatile networking device designed for seamless connectivity. Unlock the full potential of this product with the free User Manual, available for download at our website. Explore its features, setup guidelines, and troubleshooting methods easily through this comprehensive manual.

Share
Download
background image

Chapter 17: Power Over Ethernet

288

Section II: Advanced Operations

Displaying PoE Status and Settings

Use this procedure to display PoE status and settings at the switch or port 
level.

To display PoE information, do the following:

1. From the Main Menu, type 

6

 to select Advanced Configuration.

2. From the Advanced Configuration menu, type 

4

 to select Power Over 

Ethernet (PoE) Configuration menu.

The Power Over Ethernet Configuration menu is shown in Figure 110 
on page 284.

3. From the Power Over Ethernet Configuration menu, type 

3

 to select 

PoE Status.

The PoE Status menu is shown in Figure 113.

Figure 113. PoE Status Menu

The selections are defined below.

Allied Telesis AT-924T/POE - AT-S63

Production Switch

User: Manager

11:20:02 02-Jan-2008

PoE Status

1 - PoE Global Status
2 - PoE Summary Ports Status
3 - PoE Detailed Ports Status
4 - PoE Device Information

R - Return to Previous Menu

Enter your selection?

Summary of Contents for AT-9400





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-9400

Tech Source RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND Installation And Reference Manual preview
RAPTOR 2100 FPS - RAPTOR DRIVERS FOR HP-UX INSTALLATION AND
Brand: Tech Source Pages: 36
MACROMEDIA FIREWORKS 2-USING FIREWORKS Use Manual preview
FIREWORKS 2-USING FIREWORKS
Brand: MACROMEDIA Pages: 20
AMD SimNow Simulator 4.4.5 User Manual preview
SimNow Simulator 4.4.5
Brand: AMD Pages: 269
Crestron e-control Database Manager User Manual preview
e-control Database Manager
Brand: Crestron Pages: 94
Paradyne OPENLANE User Manual preview
OPENLANE
Brand: Paradyne Pages: 86
Cisco 2950C-24 - Catalyst Switch - Stackable Datasheet preview
2950C-24 - Catalyst Switch - Stackable
Brand: Cisco Pages: 18
Cisco CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE Administrator'S Manual preview
CONFERENCING EXTENSIONS - ADMINISTRATOR GUIDE FOR MICROSOFT EXCHANGE
Brand: Cisco Pages: 61
Cisco Cisco mds 9124 - fabric switch Datasheet preview
Cisco mds 9124 - fabric switch
Brand: Cisco Pages: 9
Cisco CISCO1811 End User Instructions preview
CISCO1811
Brand: Cisco Pages: 16
Cisco Cisco MDS 9020 - Fabric Switch Configuration Manual preview
Cisco MDS 9020 - Fabric Switch
Brand: Cisco Pages: 22
Cisco Catalyst X6816 Datasheet preview
Catalyst X6816
Brand: Cisco Pages: 13
Cisco Cisco mds 9124 - fabric switch Specifications preview
Cisco mds 9124 - fabric switch
Brand: Cisco Pages: 3
Cisco DCNM Configuration preview
DCNM
Brand: Cisco Pages: 7
Cisco GEM318P User Manual preview
GEM318P
Brand: Cisco Pages: 74
Cisco Craft Works Interface Quick Start Manual preview
Craft Works Interface
Brand: Cisco Pages: 32
Cisco Catalyst Series Switch 2940 Hardware Installation Manual preview
Catalyst Series Switch 2940
Brand: Cisco Pages: 82
Cisco Catalyst Series Switch 2940 Regulatory Compliance And Safety Information Manual preview
Catalyst Series Switch 2940
Brand: Cisco Pages: 28
Cisco 11.0 BT Release Notes preview
11.0 BT
Brand: Cisco Pages: 58

Brands by name

Popular brands

Load more brands