Allied Telesis AT-9400, User Manual

Page: 159 / 668

AT-S63 Management Software Menus User’s Guide
Section II: Advanced Operations 159
Displaying System Files
Use this procedure to display a list of the system files currently stored
either in the flash memory of the switch or on a compact flash card.
Listing All Files
To display a list of the system files stored in flash memory as well as on a
compact flash card (if the switch supports this and a compact flash card is
inserted in the slot), perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
2. From the System Administration menu, type 9 to select System
Utilities.
3. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is shown in Figure 47 on page 147.
4. From the File Operations Menu, type 8 to select List Files.
The following prompt is displayed:
Enter file name pattern to list:
5. Enter a boot configuration file name or pattern using the wildcard “*”.
Below are examples of how to use the wildcard to display different
files.
To display a list of all the files stored both in flash memory and on a
compact flash card in the same switch, enter:
*.*
To display a list of the certificate files, enter:
*.cer
To display a list of the boot configuration files, enter:
*.cfg
To display a list of the key files, enter:
*.key
To display a list of the files that begin with the letter t, enter:
t*.*