manualshive.com logo in svg

Allied Telesis AT-9400, User Manual

The Allied Telesis AT-9400 is a versatile networking device designed for seamless connectivity. Unlock the full potential of this product with the free User Manual, available for download at our website. Explore its features, setup guidelines, and troubleshooting methods easily through this comprehensive manual.

Share
Download
background image

Chapter 31: 802.1x Port-based Network Access Control

572

Section VIII: Port Security

Enabling or Disabling 802.1x Port-based Network Access Control

This procedure explains how to enable and disable port-based access 
control on the switch. If you have not assigned port roles and configured 
the parameter settings, you should skip this procedure and go first to 
“Setting Port Roles” on page 570. To configure the port settings, refer to 
“Configuring Authenticator Port Parameters” on page 573 and 
“Configuring Supplicant Port Parameters” on page 579.

To enable or disable 802.1x Port-based Network Access Control, perform 
the following procedure:

1. From the Main Menu, type 

7 

to select Security and Services.

The Security and Services menu is shown in Figure 71 on page 220.

2. From the Security and Services menu, type 

2

 to select Port Access 

Control (802.1X).

The Port Access Control (802.1X) menu is shown in Figure 211 on 
page 570.

3. From the Port Access Control menu, type 

1

 to select Port Access 

Control.

The following prompt is displayed:

Port Access Control (E-Enable, D-Disable):

4. Type 

E

 to enable port access control, or 

D

 to disable port access 

control. 

5. After making changes, type 

R

 until you return to the Main Menu. Then 

type 

S

 to select Save Configuration Changes.

Summary of Contents for AT-9400





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-9400

3Com IntelliJack NJ200 Supplementary Manual preview
IntelliJack NJ200
Brand: 3Com Pages: 14
DAVIS Vantage Pro2 Updater Getting Started Manual preview
Vantage Pro2 Updater
Brand: DAVIS Pages: 12
M-Audio NRV10 User Manual preview
NRV10
Brand: M-Audio Pages: 32
Cabletron Systems SmartCell ZX Administrator Installation Manual preview
SmartCell ZX Administrator
Brand: Cabletron Systems Pages: 34
Xante PlateRunner P24 Processor Supplementary Manual preview
PlateRunner P24 Processor
Brand: Xante Pages: 6
HP EliteBook 8460W Quickspecs preview
EliteBook 8460W
Brand: HP Pages: 41
HP Elite 7300 Microtower Illustrated Parts & Service Map preview
Elite 7300 Microtower
Brand: HP Pages: 4
HP MultiSeat ms6000 Hardware Reference Manual preview
MultiSeat ms6000
Brand: HP Pages: 63
HP EliteBook 8560p Brochure preview
EliteBook 8560p
Brand: HP Pages: 4
HP Elitebook 8560W Getting Started preview
Elitebook 8560W
Brand: HP Pages: 74
HP Fabric OS 7.0.0 Troubleshooting Manual preview
Fabric OS 7.0.0
Brand: HP Pages: 138
HP Evo D510 e-pc Technical Reference Manual preview
Evo D510 e-pc
Brand: HP Pages: 50
HP EliteBook 2560p Specifications preview
EliteBook 2560p
Brand: HP Pages: 34
HP FTAM/9000 Reference Manual preview
FTAM/9000
Brand: HP Pages: 102
HP NAS 1200s Release Note preview
NAS 1200s
Brand: HP Pages: 16
HP Evo D300 - Convertible Minitower Supplementary Manual preview
Evo D300 - Convertible Minitower
Brand: HP Pages: 2
HP e-PC c10/s10 Administrator'S Manual preview
e-PC c10/s10
Brand: HP Pages: 66
HP Elite 7500 Microtower Manual preview
Elite 7500 Microtower
Brand: HP Pages: 4

Brands by name

Popular brands

Load more brands