manualshive.com logo in svg

Allied Telesis AT-9400, User Manual

The Allied Telesis AT-9400 is a versatile networking device designed for seamless connectivity. Unlock the full potential of this product with the free User Manual, available for download at our website. Explore its features, setup guidelines, and troubleshooting methods easily through this comprehensive manual.

Share
Download
background image

Chapter 21: SNMPv3

364

Section IV: SNMPv3

Configuring the SNMPv3 Notify Table

This section contains a description of the SNMPv3 Notify Table menu and 
how to create, delete, and modify table entries. The Configure SNMPv3 
Notify Table menu allows you to define a name for sending traps. For each 
Notify Name, you define if a trap or inform message ia sent. The two 
message types, trap and inform, have different packet formats.

For each Notify group, you can configure:

ˆ

Notify Name

ˆ

Notify Tag 

ˆ

Notify Type

ˆ

Storage Type

The value of the Notify Tag is linked with the Tag List parameter in the 
Configure SNMPv3 Target Address Table menu. As a result, the Notify 
Tag parameter assigns a Target IP address to the Notify Table internally. 

There are three functions you can perform with the Configure SNMPv3 
Notify Table menu.

ˆ

“Creating an SNMPv3 Notify Table Entry,”  next

ˆ

“Deleting an SNMPv3 Notify Table Entry” on page 366

ˆ

“Modifying an SNMPv3 Notify Table Entry” on page 367

Creating an

SNMPv3 Notify

Table Entry

To create an entry in the SNMPv3 Notify Table menu, perform the 
following procedure.

1. Display the Configure SNMPv3 Table menu by performing steps 1 

through 3 in “Configuring the SNMPv3 User Table” on page 321. Or, 
from the Main Menu type 

5

->

5

->

5

.

The Configure SNMPv3 Table menu is shown in Figure 126 on page 
322.

2. From the Configure SNMPv3 Table menu, type 

6 

to select Configure 

SNMPv3 Notify Table.

Summary of Contents for AT-9400





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-9400

Canon imagePROGRAF W6400 Manual preview
imagePROGRAF W6400
Brand: Canon Pages: 84
Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Brand: Xerox Pages: 100
Acuma Labs De-Esser User Manual preview
De-Esser
Brand: Acuma Labs Pages: 20
KAPERSKY ANTI-VIRUS 5.5 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 134
Native Instruments Monark Manual preview
Monark
Brand: Native Instruments Pages: 49
Polycom Conference Composer User Manual preview
Conference Composer
Brand: Polycom Pages: 29
SimpleTech SimpleDrive SP-U25/120 Quick Start Manual preview
SimpleDrive SP-U25/120
Brand: SimpleTech Pages: 8
M-Audio Torq User Manual preview
Torq
Brand: M-Audio Pages: 88
Meade Autostar II Instruction Manual preview
Autostar II
Brand: Meade Pages: 62
VBrick Systems Portal Server ETV v4.2 User Manual preview
Portal Server ETV v4.2
Brand: VBrick Systems Pages: 64
3Com SUPERSTACK 3 WEBCACHE 3000 User Manual preview
SUPERSTACK 3 WEBCACHE 3000
Brand: 3Com Pages: 362
LEI Extras MapCreate Canada 6.3 Topo Addendum Manual preview
MapCreate Canada 6.3 Topo Addendum
Brand: LEI Extras Pages: 1
DigiDesign Pro Tools Reference Manual preview
Pro Tools
Brand: DigiDesign Pages: 886
Yamaha LS9 Editor User Manual preview
LS9 Editor
Brand: Yamaha Pages: 24
KapLogic Aegis2.2x Installation Manual preview
Aegis2.2x
Brand: KapLogic Pages: 24
Xerox FreeFlow 701P45570 Integration Manual preview
FreeFlow 701P45570
Brand: Xerox Pages: 12
Samsung HXDU010EB - Story Station 1 TB External Hard... Guía Del Usuario preview
HXDU010EB - Story Station 1 TB External Hard...
Brand: Samsung Pages: 7
ACRONIS BACKUP AND RECOVERY 10 - DEDUPLICATION Datasheet preview
BACKUP AND RECOVERY 10 - DEDUPLICATION
Brand: ACRONIS Pages: 2

Brands by name

Popular brands

Load more brands