manualshive.com logo in svg

Allied Telesis AT-9400, User Manual

Share
Download
Allied Telesis AT-9400 User Manual Download Page 603

AT-S63 Management Software Menus User’s Guide

Section IX: Management Security

603

The Export Key to File menu is shown in Figure 224.

Figure 224. Export Key to File Menu

5. From the Export Key to File menu, type 

1

 to select Key ID.

The following prompt is displayed:

Enter Key ID -> [0 to 65535] ->

6. Enter the key ID of the public key you want to export into the file 

system.

Note

Key Type is a read-only field. You cannot change this value.

7. Type 

3

 to toggle Key File Format to specify the format of the key. 

Possible options are: 

HEX - An internal format for storing files. Select this option for SSL 
configuration. This is the default.

SSH - A format for a Secure Shell (SSH) environment. Select this 
option for a SSH server or client.

8. Type 

4

 to select Key File Name.

The following prompt is displayed:

Enter filename (*.key) ->

9. Specify the file name of the key. The file name can be from one to 

eight alphanumeric characters, not including the extension. Spaces 
are allowed. The file name must include the extension “.key”. 

10. Type 

5 

to select Export Key to File to export the key to a file.

 Allied Telesis AT-9424T/SP - AT-S63

Marketing

User: Manager

11:20:02 02-Mar-2005

Export Key to File

1 - Key ID ............ 0
2 - Key Type .......... RSA-Public
3 - Key File Format ... HEX
4 - Key File Name
5 - Export Key to File

R - Return to Previous Menu

Enter your selection?

Summary of Contents for AT-9400





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands