manualshive.com logo in svg

Allied Telesis AT-9400, User Manual

The Allied Telesis AT-9400 is a versatile networking device designed for seamless connectivity. Unlock the full potential of this product with the free User Manual, available for download at our website. Explore its features, setup guidelines, and troubleshooting methods easily through this comprehensive manual.

Share
Download
background image

AT-S63 Management Software Menus User’s Guide

Section II: Advanced Operations

223

7. Repeat steps 5 and 6 to adjust any other variables necessary to define 

the traffic flow for this classifier.

8. After configuring the necessary variables, type 

C

 to select Create 

Classifier.

The switch creates the classifier. If any of the settings are 
incompatible, the system displays an error message.

9. To create more classifiers, repeat this procedure starting with step 3.

10. To permanently save your change, return to the Main Menu and type 

S

 

to select Save Configuration Changes.

11. To add classifiers to an ACL, refer to “Creating an ACL” on page 232. 

To add classifiers to a QoS policy, refer to “Managing Flow Groups” on 
page 252.

Summary of Contents for AT-9400





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-9400

Juniper RESIDENT CONSULTANT Datasheet preview
RESIDENT CONSULTANT
Brand: Juniper Pages: 4
TC Electronic Tap Factory Product Manual preview
Tap Factory
Brand: TC Electronic Pages: 12
F-SECURE MOBILE SECURITY 2010 FOR ANDROID Manual preview
MOBILE SECURITY 2010 FOR ANDROID
Brand: F-SECURE Pages: 20
IBM ZVSE PARALLEL ACCESS Manual preview
ZVSE PARALLEL ACCESS
Brand: IBM Pages: 10
Avaya PARTNER ACS PC Administration Getting Started Manual preview
PARTNER ACS PC Administration
Brand: Avaya Pages: 56
Avaya P120 SMON User Manual preview
P120 SMON
Brand: Avaya Pages: 61
Oracle B31679-01 Installation Manual preview
B31679-01
Brand: Oracle Pages: 130
Autodesk AUTOCAD P AND ID 2010 Brochure preview
AUTOCAD P AND ID 2010
Brand: Autodesk Pages: 4
Autodesk 657B1-000110-S001 - Maya - Mac Getting Started Manual preview
657B1-000110-S001 - Maya - Mac
Brand: Autodesk Pages: 5
Qlogic Data Migration Service User Manual preview
Data Migration Service
Brand: Qlogic Pages: 162
pagertec DELUX Installation Instructions Manual preview
DELUX
Brand: pagertec Pages: 16
MACROMEDIA BREEZE-USING THE MACROMEDIA BREEZE MANAGER Use Manual preview
BREEZE-USING THE MACROMEDIA BREEZE MANAGER
Brand: MACROMEDIA Pages: 146
Oracle Retail Data Warehouse Installation Manual preview
Retail Data Warehouse
Brand: Oracle Pages: 35
Oracle Oracle7 Server 7.3 Getting Started Manual preview
Oracle7 Server 7.3
Brand: Oracle Pages: 202
KAPERSKY ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL...
Brand: KAPERSKY Pages: 93
TANDBERG ANALYTICS EXTENSION - Administrator'S Manual preview
ANALYTICS EXTENSION -
Brand: TANDBERG Pages: 36
FARONICS CORE Manual preview
CORE
Brand: FARONICS Pages: 99
DAVIS WeatherLink Software User'S Manual preview
WeatherLink
Brand: DAVIS Pages: 116

Brands by name

Popular brands

Load more brands