Allied Data Technologies TRON SECURE 33.6, Manual

Page: 36 / 63

Secure AT-COMMANDS
A number of additional AT-commands was implemented in the TRON Secure 33.6 to perform the
Secure functions. Below you will find a list of all Secure commands.
Furthermore a brief description is shown, as well as an example if needed.
Most commands are protected by the Operator Password to prevent illegal use.
General Secure Commands
Command description
AT*C Change operator password
AT*E Exit operator mode
AT*O Enter Operator mode
AT*Q Lock the modem
Auto Dialback commands
Command description
AT*A Auto-dialback on/off
AT&J Select secondline dialback
AT*L List callback entries
AT*M Change/show Auto-dialback messages
AT*P Programm Dialback entries
ATS15 Change/show time before dialback
AT*V Polarity check on/off
Data Encryption commands
Command description
AT%D DES on/off
AT*K Change the DES keys
LOG function commands
Command description
AT*F Flush the LOG buffer
AT*R LOG-function on/off
AT*S Show the LOG buffer
AT*T Read/set the Real Time Clock
TRON SECURE 33.6
Allied Data Technologies BV - Allways one step ahead 36