Allied Data Technologies TRON SECURE 33.6, Manual

Page: 24 / 63

AT*H Negotiation speed MNP10
This command determines the line speed during negotiations between two MNP Class
10 modems. After that, communication takes place at a higher speed.
0 -
Negotiation at the highest possible supported speed (default)
1 - Negotiation at 1200 bps
ATI Identification
Depending on the entered parameter, the modem will send the required information to
the screen.
0 -
Product code
1, 2 not applicable
3 - Type of modem with version number of the software
AT&K Flow control
This command determines the modem/terminal flow control.
0 -
Flow control off
3 - RTS/CTS flow control on (default)
4 - Xon/Xoff flow control on
5 - Xon/Xoff flow control transparent on
6 - Both Xon/Xoff and RTS/CTS flow control on
AT\K Break control
The modem will react to a received ‘break’ of the terminal (DTE), a remote modem or the
AT\B command in accordance with the given parameters.
When a ‘break’ has been received from the terminal and the modem is working in the
data mode, its working can be controlled by the following parameters.
0 -
On-line command mode, no ‘break’ is sent to the remote modem
1 - Empty data buffers and send a ‘break’ to the remote modem
2 - Like 0
3 - Send a ‘break’ to the remote modem immediately
4 - Like 0
5 - Send a ‘break’ to the remote modem with the data; processing takes place in
order of sending (default)
During a connection, while the modem is in the command mode, the user can send
‘breaks’ to the remote modem with the AT\B command.
0 -
Empty the data buffers and send a ‘break’ to the remote modem
1 - Like 0
2 - Send a ‘break’ to the remote modem immediately
3 - Like 2
4 - Send a ‘break’ to the remote modem with the data; processing takes place in
order of sending
5 - Like 4 (default)
TRON SECURE 33.6
Allied Data Technologies BV - Allways one step ahead 24