It is possible that a connection has been established at another communication speed than you
selected. In that case, you have to set the communication program at the new speed. Some
programs do this automatically. If the speed converter of the modem is on (default), the
communication program does not have to be set again since the speed to the computer remains
the same.
The Carrier LED (CD) is on to indicate that there is a data connection, at which green is a safe,
error-free connection.
b.
If it is not possible to establish a connection, one of the following messages appears on
the screen:
ERROR
You made a typing error.
NO DIALTONE
The modem does not recognize a dialtone.
Therefore, it is not possible to call.
Check whether the modem is connected with the telephone
network.
BUSY
The telephone number that you dialled, is busy.
NO CARRIER
The called modem does not have the speed that was selected.
Another explanation is that there is no modem available at the
dialled number.
NO ANSWER
There is no response.
7.
Terminate the connection.
There are three possibilities to do so:
1.
Ask the called system base to disconnect.
2.
Use the hang-up command of the communication program.
3.
Ask the modem to end the connection.
To do this use this command sequence:
Wait 1 second
Type:
+++
On the screen appears:
OK
Type after that:
ATH <Enter>
On the screen appears:
NO CARRIER
TRON SECURE 33.6
Allied Data Technologies BV -
Allways one step ahead
14
Summary of Contents for TRON SECURE 33.6
Page 2: ...Allied Data Technologies BV Allways one step ahead 2 TRON SECURE 33 6...
Page 4: ...TRON SECURE 33 6 Allied Data Technologies BV Allways one step ahead 4...
Page 6: ...Allied Data Technologies BV Allways one step ahead 6 TRON SECURE 33 6...
Page 34: ...TRON SECURE 33 6 Allied Data Technologies BV Allways one step ahead 34...
