AT&Y
Modem configuration after power on
This command tells the modems which profile to use at power-up.
0 -
Configurate with profile 0 at power-up
1 -
Configurate with profile 1 at power-up
See the AT&W command.
ATZ
Soft reset and restore profile
The modem performs a soft reset and restores the profile according to the parameter
supplied.
0 -
soft reset and restore profile 0
1 -
Soft reset and restore profile 1
See the AT&W command.
AT&Z
Store a telephone number in memory
Your modem supports the storage of 4 telephone numbers in permanent memory.
These telephone numbers may have a length of 40 characters at the most.
AT&Zn=x (n = 0 to 3; x = telephone number).
See the ATDS=n command
‘+++’
Escape code sequence
When the modem has established a connection (and is therefore in the data mode), it
is possible to switch the modem into the command mode. This can be done by sending
three ASCII characters as specified in register S2 (default the character ‘+’).
A monitoring time is required for the first character (pre sequence time), one for the last
character (post sequence time), and a monitoring time between the characters (inter
character time). This time is determined by the value of register S12 (default 1 second).
TRON SECURE 33.6
Allied Data Technologies BV -
Allways one step ahead
33
Summary of Contents for TRON SECURE 33.6
Page 2: ...Allied Data Technologies BV Allways one step ahead 2 TRON SECURE 33 6...
Page 4: ...TRON SECURE 33 6 Allied Data Technologies BV Allways one step ahead 4...
Page 6: ...Allied Data Technologies BV Allways one step ahead 6 TRON SECURE 33 6...
Page 34: ...TRON SECURE 33 6 Allied Data Technologies BV Allways one step ahead 34...
