34
70143101
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
33. COMPLETE GAS VALVE ASSEMBLY
STACKED TUMBLE DRYER
Upper Tumble Dryer
a. Remove screws holding gas valve cover to
stove and remove cover. Refer to
.
b. Disconnect gas valve wire connections.
c. Disconnect gas line going to upper pocket
tumble dryer.
d. Disconnect gas valve pipe union nut holding
gas shut off valve to gas valve nipple.
e. Remove screws holding gas valve to gas valve
bracket and remove valve.
Lower Tumble Dryer
a. Remove screws holding gas valve cover to
stove and remove cover. Refer to
.
b. Disconnect gas valve wire connections.
c. Disconnect gas line at lower pocket gas valve.
d. Remove screws holding gas valve to gas valve
bracket and remove valve.
IMPORTANT: When reinstalling gas valve, purge
air and sediment from gas service line before
connecting to tumble dryer. Purge remaining air
until odor of gas is detected, then tighten
connection. Use pipe compound resistant to action
of L.P. gas on all pipe threads.
To reduce risk of fire or explosion, check
pipe connections for gas leaks with a non-
corrosive leak detection fluid. Do not use an
open flame to check for gas leaks!
W310
WARNING
Figure 24
T2
9
8SE1B
Gas
Valve
Manual
Shut-Off
Valve
Close
Nipple
Union
Pipe
Nipple
Tee
Nipple
Adapter
Gas Line
Valve
Attachin
g
Screw
Gas Valve
Bracket
