70143101
9
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Section 3
Troubleshooting
IMPORTANT: Refer to wiring diagram for aid in
testing tumble dryer components.
1. TUMBLE DRYER DOES NOT START
2. MOTOR DOES NOT START
POSSIBLE CAUSE
TO CORRECT
Cylinder door is open.
• Close cylinder door completely.
Drying timer is in an off position. (Manual Timer
Models)
• Turn drying timer on.
Incorrect amount of coins inserted into coin drop.
• Check that proper amount of coins are inserted.
Inoperative coin drop.
• Test coin drop and replaced if inoperative.
PUSH-TO-START button not properly activated.
(Manual Timer Models)
• Press and hold in PUSH-TO-START button for three
seconds.
Electrical power off or circuit breaker fuse blown.
• Check power supply, or replace fuses.
Lint panel/drawer open.
• Close and lock lint panel/drawer.
POSSIBLE CAUSE
TO CORRECT
Electrical power off or circuit breaker fuse blown.
Check power supply, or replace fuses.
Loading door switch or lint drawer switch not closed
or inoperative switch.
Close door, drawer or test switch and replace if inoperative.
Door switch improperly adjusted.
Refer to
in this manual for door switch
adjustment.
Start circuit not complete.
Press and hold in PUSH-TO-START button for three
seconds.
Inoperative motor.
Have motor tested and replace if inoperative.
Broken, loose, or incorrect wiring.
Refer to wiring diagram.
Fan or fan motor binding.
Replace fan or motor assembly.
Cylinder or cylinder motor binding.
Replace cylinder, bearing, rollers, or motor assembly.
