Allen-Bradley PowerFlex 527, User Manual

Page: 68 / 176

68 Rockwell Automation Publication 520-UM002B-EN-E - December 2017
Chapter 3 Configuring the PowerFlex 527 Drive with Integrated Motion
Your axis moves to the new motion group.
To get the minimum motion group base update
rate, see
Motion Group Base Update Rate on
page 165 .
Configure Axis Properties
Axis configuration depends on the motor or other devices (for example, an
external encoder) associated with each axis. This section provides guidelines for
configuring induction motors.
• Configure Induction Motor Axis Properties (Frequency Control) on
page 68
• Configure Induction Motors Axis Properties (Velocity Loop) on page 73
• Configure Induction Motors Axis Properties (Position Loop) on page 77
Configure Induction Motor Axis Properties (Frequency Control)
The PowerFlex 527 drives support basic Volts/Hertz (V/Hz), Fan/Pump Volts/
Hertz, Sensorless Vector Control (SVC), and Sensorless Vector Control (SVC)
Economy frequency control methods.
Follow these steps to configure the induction motor axis properties.
1. In the Controller Organizer, right-click an axis and choose Properties.
2. Select the General category.