Allen-Bradley PowerFlex 527, User Manual, Page: 62 / 176

62 Rockwell Automation Publication 520-UM002B-EN-E - December 2017
Chapter 3 Configuring the PowerFlex 527 Drive with Integrated Motion
c. From the Power Structure pull-down menu, choose the catalog number
that matches your power structure.
d. Check the Verify Power Rating On Connection check box to ensure
that the proper power structure defined in the profile is the same as the
connected drive. If the two do not match, a connection error occurs,
which indicates a power mismatch.
Verify Power Rating on Connection is checked by default. It is enabled
in offline mode.
3. Click OK to close the Module Definition dialog box.
4. Click the Safety tab.
The connection between the controller and the PowerFlex 527 drive is
based on the following:
• Drive catalog number must be PowerFlex 527 (integrated)
• Drive Safety Network Number (SNN)
• GuardLogix slot number