Allen-Bradley Kinetix 300, User Manual, Page: 167 / 230

Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 167
Kinetix 300 Drive Safe Torque-off Feature Chapter 8
Kinetix 300 Drive Safe
Torque-off Wiring Diagrams This appendix provides typical wiring diagrams for the Kinetix 300 drive safe
torque-off feature with other Allen-Bradley safety products.
For additional information regarding Allen-Bradley safety products, including
safety relays, light curtain, and gate interlock applications, see the Safety Products
Catalog, website
http://www.ab.com/catalogs .
The drive is shown in a single-axis relay configuration for both category 0 and
category 1 stops per EN-60204-1 Safety of Machinery Directive. These are
examples, however, and user applications can differ based on the required overall
machine performance level requirements.
Figure 79 - Single-axis Relay Configuration (Stop Category 0) with Automatic Reset
IMPORTANT
The Kinetix 300 drive has been qualified and rated as a component to meet ISO
13849-1 performance level d (PLd), safety-level category 3. Dual inputs and
drive monitoring of the safe torque-off circuit, STO-4 and ST0-6, are done to
prevent drive enable should either or both of these inputs not function.
It is suggested to evaluate the entire machine performance level required with
a risk assessment and circuit analysis. Contact your local distributor or Rockwell
Automation Sales for more information.
+24V DC
COM
Status
Safety Input 1
Safety Common
Safety Input 2
1
2
3
4
5
6
S21 S22 S34 A2 14 24 34 42
A1 S11 S52 S12 13 23 33 41
Kinetix 300 Drive
Safe Torque-off (STO)
Connector with
Wiring Header
External 24V COM
Safe Torque-off
Demand
Ex24V DC
Allen-Bradley
Monitoring Safety Relay
MSR127RP (440R-N23135)
Auxiliary Signal
to PLC
Pins 1 and 2 are not used when using Safety Inputs.
Pin 3 is a sinking output.