Allen-Bradley ControlLogix 1756-DMD30, User Manual, Page: 93 / 369

Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-13
Parameters
To configure a Drive module to operate in a specific way, drive
parameters may have to be set. Three types of parameters exist:
•
ENUM Parameters
These parameters allow a selection from 2 or more items
•
Bit Parameters
These parameters have individual bits associated with features
or conditions. If the bit is 0, the feature is off or the condition is
false. If the bit is 1, the feature is on or the condition is true.
•
Numeric Parameters
These parameters have a single numeric value (i.e. 0.1 Volts).
The example on the following page shows how each parameter type
is presented in this manual.