ALLEN & HEATH Qu-16 Reference Manual Download Page 80

Page: 80 / 92

Qu Mixer Reference Guide

AP9372 iss.9

13.Qu-Pac Qu-Control Screen

Qu-Control is a custom assignable screen which lets you present just the few controls needed for basic

operation. For example, to control background music source and level within a music bar. It can be

associated with the Qu ‘Basic User’ with permissions set by the ‘Admin’ user so that only this screen is

available for non-technical bar staff, for example to adjust the background music. Access to the live

mixing and setup functions can be locked out for the Basic User.



The Qu-Control screen is available on Qu-Pac only. However, the Qu-Control app

for iOS devices is compatible with all Qu mixers. The app replicates the Qu-Control

functionality for wireless remote control.

Qu-Control key

- Press to open the Qu-Control screen. This presents buttons and

level controls configured by the Admin user. If none have been configured the screen

will be blank. Tabs allow access to up to 5 custom screens.

Touch a button to toggle its state. Touch to highlight a level control and adjust it using

the screen rotary.

Setup page

- Press the

key to open the Qu-Control setup page for the currently

active tab. This is only available to the Admin User.

Functions can be assigned to up to 15

positions arranged as a grid of 3 rows with 5

columns. If a position is unassigned then it will

appear blank in the user screen.

Touch to open the Function list. You can
choose mutes, level or assignments (On/Off)

associated with channels or mixes.

Send On/Off Radio lets you assign a selection

of buttons to operate in ‘radio mode’ where

pressing one will turn the others off.

Touch and spin the rotary to scroll through the channels or mixes. Once you have

finished assigning the screen press Apply to save and exit or Cancel to exit without

saving.



Qu-Control settings are stored to USB device as part of the Show file. They are not

stored in Scene memories.

User Permissions

- Three user profiles are available. The ‘Admin’ User can set

access for the ‘Standard’ and ‘Basic Users. Various parameters can be blocked and

passwords can be set. Go to the

Home / User

screen to set user permissions or log in

as a different user.

Example:

Admin User

Engineer in charge of the installation

Standard User Mixes live shows, blocked from setup functions

Basic User

Controls background music only

Qu-Control key

Setup page

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands