ALLEN & HEATH Qu-16 Reference Manual Download Page 53

Page: 53 / 92

Qu Mixer Reference Guide

AP9372 iss.9

Stereo Playback

– You can play back audio files

from a USB storage device plugged into Qu-Drive:



Format = 44.1 or 48kHz, 16 or 24-bit, WAV file



Use the USB device with the Qu mixer only. Do not

use it for other applications.

Format the USB device on the Qu mixer before

loading the playback files. Use the

Setup / Utility /

Qu-Drive

screen. This clears the drive and sets up the

Qu directory structure.

Copy audio WAV files on to USB from your

computer. Place these in the AHQU / USBPLAY

directory. Plug the USB device into Qu-Drive.

Patch the playback to the ST3 channel using the

Processing / Preamp

screen

key to open the

Preamp Source screen. Make sure Qu-Drive is

selected as the ‘Global USB Source’. Select USB as

the source for ST3.

Once you have selected Qu-Drive as the global USB

source you can also use the panel USB key in the

Preamp section to toggle between the ST3 preamp

and USB source.

Select the track to play back by touching the name

box. You can choose a track from the Playback or the

Recordings directory. Touch

Select

to confirm.

Press the

key for options to choose playback

mode:

Qu-Drive Multitrack page

– This screen

presents the controls for multitrack recording to, and

playback from a USB storage device plugged into the

top panel Qu-Drive port.

The blue Stop button lights if the USB device is

recognised by the mixer. The controls are disabled if a

device is not plugged in or recognised.

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands