ALLEN & HEATH Qu-16 Reference Manual Download Page 78

Page: 78 / 92

Qu Mixer Reference Guide

AP9372 iss.9

12. USB Audio Interface and DAW Control

The Qu mixer can stream audio and send MIDI messages to and from an Apple

Mac or Windows

computer via the rear panel USB B port. This lets you work with a DAW (Digital Audio Workstation)

running on your computer. The Custom Layer can provide MIDI control faders and keys. You can work

with the standard Qu MIDI messages or download the Allen & Heath DAW Control driver to convert these

into one of the popular HUI or Mackie Control protocols.

12.1

Audio streaming

Apple

Mac

USB audio streaming with Qu MIDI message control is supported

natively by the Mac so it does not require any driver.

Windows

USB audio streaming with Qu MIDI message control needs a driver.

Download and install the Allen & Heath Qu Windows Driver. Power up

the Qu mixer, connect its rear panel USB B port to the PC, run the

installer and follow the instructions on the screen. The driver is ASIO 2.2
compliant and supports standard WDM/DirectX Windows interfaces

including MME and DirectSound.

Connect the Qu mixer to the computer – Plug a

suitable cable into the rear panel USB B port.

Stream audio to the computer – Audio is sent via the

rear panel USB B port. Go to the

Setup / Output

Patch / USB Audio

screen to choose which Qu

outputs to patch to the USB stream.

CH/ST/Grp source button

Set this to Insert Sends if you do not want the input

channel and group USB sends to be affected by the

mixer processing (EQ, Comp, Gate, Delay). This sends

the raw Preamp and unprocessed Group signals to the

USB stream and is the typical setting for live recording.

Set this to Direct Outs if you want the input channel

USB sends to follow the channel global Direct Output

option. It also sets the Group sends to be post-

processing and post-fader. This is the typical setting

for studio recording (working with a DAW).



The global Direct Output option affects all inputs

and is set in the channel

Routing

screen.

Stream audio back to the Qu mixer – Audio is

returned via USB B. This is mapped one-to-one to the

inputs channels. Use the

Preamp

screen

key

Source page to patch USB B to the channels.

Make sure you have set ‘USB B Streaming’ as the

global USB source.

The following sources can be patched:

Unassigned

Mono channel (Insert or Direct Out)

Stereo channel (Insert or Direct Out)

FX Ret

FX returns 1-4 pre-fader

Grp

Group (Insert or post-fader)

Mix

Mix 1-10 post-fader

LR pre

Main LR mix – pre-fader

LR post

Main LR mix – post-fader

L+R pre Main LR mono sum – pre-fader
MTX

Matrix post-fader

PAFL

Stereo PAFL monitor

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands