ALLEN & HEATH Qu-16 Reference Manual Download Page 54

Page: 54 / 92

Qu Mixer Reference Guide

AP9372 iss.9

Multitrack Record

– You can record to a USB

storage device plugged into Qu-Drive:



18 Tracks = Individually patchable sources



Record format = 48kHz, 24-bit, WAV file



Data rate = 144 KB/sec per track (max 4GB total)



Qu allocates a folder name ‘QU-MTnnn’ for each

recording where ‘nnn’ increments from 001 to 999

starting at the highest 1 it finds on the

device. The tracks are named ‘TRKnn’ within the

folder where ‘nn’ is 01 to 18.



Use the USB storage device with the Qu mixer

only. Do not use it for other applications.

Format the USB device on the Qu mixer before

starting to record. Use the

Setup / Utility / Qu-Drive

screen. This clears the USB and sets up the Qu

directory structure.

Patch the sources to be recorded using the

Setup /

Output Patch / USB Audio

screen.

Touch a track box and turn the rotary to select the

source. Press the ‘+1’

key to increment the

assignments. Choose the global source for CH and ST

channels and the Audio Groups (Insert sends (default)

or Direct Outputs).

Arm the recording by touching the red circle Record

button. Touch the Play button to start the recording.

Multitrack Playback

– You can play back your

multitrack recordings from the USB device plugged

into the Qu-Drive port:

Patch the playback to the input channels using the

Processing / Preamp

screen

key to open the

Preamp Source screen. Make sure Qu-Drive is

selected as the ‘Global USB Source’. Select USB as

the source for the channels you wish to play back.

Select the recording to play back by touching the

name box. You can choose a folder from the list.

Touch

Select

to confirm.

Press the

key for options

to choose playback mode:



Qu always expects 18

tracks to be present in the multitrack folder. -You can

create dummy tracks by duplicating and renaming

existing track files.



Choose to play back either Qu-Drive stereo or

multitrack. It is not possible to play back both stereo

and multitrack at the same time.



We recommend you transfer previous

recordings to your computer and then

reformat the USB device on the Qu mixer

before using it for each show. This will

avoid potential audio skipping that may

occur with some USB devices containing

long recordings.

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands