ALLEN & HEATH Qu-16 Reference Manual Download Page 37

Page: 37 / 92

Qu Mixer Reference Guide

AP9372 iss.9

9.7

Channel Routing

The Touch Screen presents tabs to access a CH or ST channel routing assignments and send levels

when its fader strip

Sel

key is selected and the Touch Screen

Routing

screen is active. The SuperStrip

Pan control provides quick access to the related mix pan setting for the channel. The

key is used to

access the Mute and DCA Group masters while in any Routing screen.

9.8

Working with the Routing screens



Press a fader strip

Sel

key.



Press the Touch Screen

Routing

key.



Touch the tabs at the top of the screen.



Touch screen buttons and use the rotary.



Press the

key to access the Mute and DCA Groups.

Pan

The rotary Pan control becomes active when an input

channel

Sel

key is active. Its function depends on

currently selected Master Strip mix:

LR = Channel main pan

FX send = Disabled

Group (not Qu-16) = Channel main pan

Mono Mix1-4 = Disabled

Stereo Mix5-10 = Channel send pan

Pan becomes a Width control when linked for two

input channels – Panning one to the left automatically
pans the other by the same amount to the right.

Channel Routing screens

Tabs available on the CH and ST routing screens:

Main tab – Global Direct Output settings. These affect

all channels.

Mix Sends – Assignments, pre/post, levels and pan to

the mono Mixes 1-4 and stereo Mixes 5-6, 7-8, 9-10.

FX Sends – Assignments, pre/post and levels to the

FX mixes (Qu-16 has 2, the other models have 4).

Grp Sends – Assignments to the stereo Groups if they

are in Group Mode, or assignments, levels and pan if

they are in Mix Mode (not on Qu-16).

Mute/DCA Group Assign – Assignments to the Mute

and DCA groups.

Qu-Pac

Qu-16, Qu-24, Qu-32

Summary of Contents for Qu-16





























































































Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands

ALLEN & HEATH Qu-16, Reference Manual

Search results

Summary of Contents for Qu-16

Reviews:

Related manuals for Qu-16

Brands by name

Popular brands