Antennas
Removing the antennas
Prerequisites
1. Follow the procedure in
Before working inside your computer
2. Remove the
.
3. Remove the
4. Remove the
5. Remove the
6. Remove the
About this task
The following images indicate the location of the antennas and provides a visual representation of the removal procedure.
Steps
1. Remove the four screws (M3x4t) that secures the antennas to the top bezel.
2. Remove the antenna cables from the routing guides on the top bezel.
3. Lift the antenna off the top bezel.
Installing the antennas
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the antennas and provides a visual representation of the installation procedure.
77
Summary of Contents for Aurora R11
