Alienware Aurora R11, Service Manual

Page: 102 / 105

Boot
Enable USB Boot Support Allows you to enable or disable the USB Boot control.
Load Legacy OPROM Allows you to enable or disable the Legacy Option ROM.
Boot Option Priorities Displays the available boot devices.
Boot Option #1 Displays the first boot device. Default: UEFI: Windows Boot
Manager.
Boot Option #2 Displays the second boot device. Default: Onboard NIC
Device.
Boot Option #3 Displays the third boot device. Default: Onboard NIC
Device.
Table 8. System setup options—Exit menu
Save & Exit
Save Changes and Reset Allows you to exit system setup and save your changes.
Discard Changes and Reset Allows you to exit system setup and load previous values for
all system setup options.
Restore Defaults Allows you to load default values for all system setup
options.
Discard Changes Allows you to exit your changes.
Save Changes Allows you to save your changes.
Clearing CMOS settings
Prerequisites
1. Follow the procedure in
Before working inside your computer .
2. Remove the left-side cover .
About this task
The following images indicate the location of the CMOS jumper and provide a visual representation of the clearing CMOS
procedure.
Steps
1. Disconnect the system-board power cable from the system board.
2. Remove the jumper plug from pins 217 and replace it on pins 216 (P216).
102