ALIBI ALI-NVR71128R User Manual Download

Page: 55 / 232

Alibi™ NVR Firmware V3.6.22 User Manual

Name

Description

Playback

Enter the playback interface and start playing back the video of the selected channel.

Output Mode

Select one of four output modes: Standard, Bright, Gentle or Vivid.

NOTE

•

The dwell time of the live view configuration must be set before using Start Auto-switch.

•

If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when right-
clicking the mouse on this camera.

4.5 Live View Status icons

In the

Live

view mode, icons can appear in the upper-right of the screen for each channel, showing the status of the record and

alarm in the channel.

Icon

Type

Reason

Alarm

This icon appears in the upper right corner of the live video stream. It results from video loss, video

tampering, motion detection, sensor alarm, etc.

Record

Manual record, schedule record, motion detection or alarm triggered record

Record and Alarm

Both alarm and record status

Event/Exception

For the occurrence of motion detection, sensor alarm or exception information. This icon appears at the

lower-left corner of the screen. Click on the icon to display the event/exception reason.

4.6 Quick Setting Toolbar

Left-clicking the mouse on a viewing frame opens a Quick Setting Toolbar at the top or bottom of the frame.

Instant playback

Live view

strategy

Digital zoom

Face detection

PTZ control

Capture

Enable/disable

manual record

Switch

stream

Image

setting

Information

Audio

Mute/ On

Instant Playback

: Plays what was recorded in the previous five minutes. Nothing is played if a recording was not made at that

time.

Capture

: Click to create a snapshot of the Live View image.

SECTION 4: LIVE VIEW INTERFACE

Summary of Contents for ALI-NVR71128R









































































































































































































































Search results

Summary of Contents for ALI-NVR71128R

Reviews:

Related manuals for ALI-NVR71128R

Brands by name

Popular brands

ALIBI ALI-NVR71128R, User Manual

Search results

Summary of Contents for ALI-NVR71128R

Reviews:

Related manuals for ALI-NVR71128R

Brands by name

Popular brands