manualshive.com logo in svg

ALIBI ALI-NVR71128R, User Manual, Page: 110 / 232

Share
Download
ALIBI ALI-NVR71128R User Manual Download Page 110

102

www.Observint.com

6.12  VCA Search features

VCA Search features are used to quickly analyze data generated from VCA analysis of video images. To use VCA Search features, the 
VCA feature must first be enabled and configured in the camera(s). 

NOTE

: All Alibi cameras do not support all VCA features shown 

in this section. To open the VCA Search interface, go to 

Menu | VCA Search

. 

6.12.1  Behavior search

The behavior analysis detects suspicious behavior based on VCA analysis. To use this analysis, specific linkage actions are performed 
when the VCA alarm is triggered. To use VCA Search - Behavior Search: 

1.  Configure the camera for any of the following VCA features: 

 

—

Line Crossing detection

 

—

Intrusion Detection

 

—

Unattended Baggage Detection

 

—

Object removal Detection

 

—

Region Entrance Detection

 

—

Region Exiting Detection

2.  Open the VCA Search Behavior Search menu. Go to 

Menu | VCA Search | Behavior Search

. See above. 

3.  Check the box(es) for the camera(s) you want to search. 
4.  Click the 

Start Time 

field and then set the date and time at which you want to search begin the search for data. Similarly, set 

the End Time field. 

5.  Open the 

Type

 drop down list, and then select the type of VCA event you want to search for. You can leave the option at All to 

find all VCA events. 

SECTION 6: VCA FEATURES

Summary of Contents for ALI-NVR71128R









































































































































































































































Reviews:

No comments