ALIBI ALI-NVR71128R Page 180 User Manual Download

Page: 180 / 232

172

www.Observint.com

SECTION 9: NETWORK SETTINGS

3. Click

Apply

to save your settings and close the menu.

4. Click the

Email

tab to open the email settings men.

5. Configure the following Email settings:

—

Enable Server Authentication

(optional): Check the checkbox to enable the server authentication feature.

—

User Name

: The user account of sender’s Email for SMTP server authentication.

—

Password

: The password of sender’s Email for SMTP server authentication.

—

SMTP Server

: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).

—

SMTP Port No

.: The SMTP port. The default TCP/IP port used for SMTP is 25.

—

Enable SSL/TLS

(optional): Click the checkbox to enable SSL/TLS if required by the SMTP server.

—

Sender

: The name of sender.

—

Sender’s Address

: The Email address of sender.

—

Select Receivers

: Select the receiver. Up to 3 receivers can be configured.

—

Receiver

: The name of user to be notified.

—

Receiver’s Address

: The Email address of user to be notified.

—

Enable Attached Pictures

: Check the Enable Attached Picture box if you want to send email with attached alarm

images. The interval is the time of two adjacent alarm images. You can also set SMTP port and enable SSL/TLS here.

—

Interval

: The interval refers to the time between two actions of sending attached pictures.

—

Test

: Click this button to send a test message to verify that the SMTP server can be reached.

6. Click

Apply

to save your settings. A configuration using a Gmail email account may look like the following.

Summary of Contents for ALI-NVR71128R









































































































































































































































Search results

Summary of Contents for ALI-NVR71128R

Reviews:

Related manuals for ALI-NVR71128R

Brands by name

Popular brands

ALIBI ALI-NVR71128R, User Manual

Search results

Summary of Contents for ALI-NVR71128R

Reviews:

Related manuals for ALI-NVR71128R

Brands by name

Popular brands