ALIBI ALI-NVR71128R Page 56 User Manual Download

Page: 56 / 232

www.Observint.com

SECTION 4: LIVE VIEW INTERFACE

PTZ Control

: This icon is dark if PTZ control is not supported.

Digital Zoom

: After selecting this option, a faint slider bar with (zoom in) and (zoom out) icons will appear in the upper left

corner of the video image. To use this feature, do one of the following:

•

Click on the spot in the video image, and then use the mouse scroll wheel to zoom in or out at that spot.

•

Click the icon to zoom in on the video image, and then drag the image the video image with the mouse to zoom on another
spot. Click to zoom out.

•

Drag the slider on the slider bar up or down to zoom in or out, and then drag the video image with the mouse to zoom on
another spot.

•

Right-click the mouse to cancel the zoom feature.

Image Settings

: Click this icon to open menus for creating customized setting for the brightness, contrast, saturation and hue of

the camera image. After making an adjustment on in this menu, the NVR will respond within a few seconds. Click

when your

adjustments are complete.

Face Detection

: Identifies faces detected in the live view image. After selecting this option, click

Yes

in the pop-up window.

Live View Strategy

: Use this feature to select Real-time, Balanced, Fluency. These features can improve the display of the camera

channels.

Summary of Contents for ALI-NVR71128R









































































































































































































































Search results

Summary of Contents for ALI-NVR71128R

Reviews:

Related manuals for ALI-NVR71128R

Brands by name

Popular brands

ALIBI ALI-NVR71128R, User Manual

Search results

Summary of Contents for ALI-NVR71128R

Reviews:

Related manuals for ALI-NVR71128R

Brands by name

Popular brands