ALIBI ALI-NVR71128R User Manual Download Page 188

Page: 188 / 232

180

www.Observint.com

SECTION 10: SYSTEM MAINTENANCE

10.3 Import / Export system configuration

You can export the NVR configuration, then import the file later to restore the earlier configuration.

1. Attach an USB storage device, such as a USB flash drive or USB disk drive, to the NVR USB port.
2. Open the

Import/Export

menu. Go to

Menu | Maintenance | Import/Export

3. On the

Device Name

line, open the drop down list and select the destination for the exported configuration file. In this

example, a USB drive was selected.

Export configuration file

4. In the Device directory, highlight the location where you want to save the configuration file.
5. Click the

Export

button to start the export. Allow the operation to finish before continuing. When the export operation is

successful, an “Attention” “Export succeeded” pop-up window will open.

6. Click

to close the pop-up window.

Summary of Contents for ALI-NVR71128R









































































































































































































































Search results

Summary of Contents for ALI-NVR71128R

Reviews:

ALIBI ALI-NVR71128R, User Manual, Page: 188 / 232

Search results

Summary of Contents for ALI-NVR71128R

Reviews: