Algas SDI TORREXX TX240, Operation & Maintenance Manual

Page: 7 / 93

TORREXX TABLE of CONTENTS - Continued
SOLENOID VALVE ELECTRICAL TEST 6-39
Figure 16 – Solenoid Valve Electrical Test 6-39
7. TORREXX OPTIONS
ECONOMY OPERATION 7-40
Figure 17 – TORREXX Economy Valve Installation
7-40
TORREXX ECONOMY VALVE MAINTENANCE 7-41
Figure 18A – STEP 1 – Unscrew the inlet housing from the outlet housing. 7-41
Figure 18B – STEP 2 – Remove old O-rings and clean all piston surfaces.
7-41
Figure 18C – STEP 3 – Clean all O-ring contact surfaces and the
bottom surface of the outlet housing. Apply excess lithium O-ring grease
to inside of both housings.
7-42
Figure 18D – STEP 4 – Replace the three O-rings contained in the Economy
Valve repair kit. Apply excess lithium O-ring grease to all O-rings.
7-42
Figure 18E – STEP 5 – Make sure that the pin hole is clear and the spring is
undamaged. Carefully reassemble all the parts. Apply lubrication grease on the
straight threads if necessary. The inlet housing MUST be screwed all the way down
for the valve to accurately function at the set pressure. DO NOT apply sealant
agent or Teflon tape on these threads.
7-42
TX REMOTE BOX 7-43
Figure 19 – Remote START/STOP Box 7-43
VALVE AND STRAINER PACKAGE 7-44
FILTAIRE CONTAMINANT SEPARATOR 7-44
Figure 20 – FILTAIRE Operation 7-44
APPENDIX A – TECHNICAL INFORMATION
TORREXX LPG VAPORIZER DATA SHEETS (CE/NEMKO)
TORREXX ELECTRIC VAPORIZER SPARE PARTS AND ACCESSORIES (CE/NEMKO)
Figure 21 – TORREXX Electric Vaporizer Major Components and Accessories
HEATER BUSSING DIAGRAMS
EQUIPMENT DRAWINGS
INSTALLATION DRAWINGS
TORREXX WIRING SCHEMATIC
REMOTE BOX WIRING SCHEMATICS
ASCO SOLENOID VALVE USED BY ASDI
SOLENOID NOISE
SOLENOID VALVE INSTALLATION AND MAINTENANCE INSTRUCTIONS
WARRANTY REGISTRATION CARD – Refer to the nameplate on the unit to fill out the product
registration.