Algas SDI TORREXX TX240, Operation & Maintenance Manual

Page: 49 / 93

ASDI Operations and Maintenance – TX Models – P/N: 54629
7-42
Figure 18C – STEP 3 – Clean all O-ring contact surfaces and the bottom surface of the outlet housing.
Apply excess lithium O-ring grease to inside of both housings.
Figure 18D – STEP 4 – Replace the three O-rings contained in the Economy Valve repair kit. Apply excess
lithium O-ring grease to all O-rings.
Figure 18E – STEP 5 – Make sure the pin hole is clear and the spring is undamaged. Carefully reassemble
all parts. Apply lubrication grease on the straight threads if necessary. The inlet housing MUST be
screwed all the way down for the valve to accurately function at the set pressure. DO NOT apply sealing
agent or Teflon tape on these threads.