Alaxala AX3630S, Software Manual

Page: 749 / 875

33. CFM
721
ma name
Sets the name of an MA to be used in the applicable domain.
Syntax
To set or change information:
ma <no.> name {str <strings> | vlan <vlan id> }
To delete information:
no ma <no.> name
Input mode
(config-ether-cfm)
Parameters
<no.>
Specifies the MA ID number.
1.
Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 65535
{str <strings> | vlan <vlan id> }
Specifies the name of an MA by using a character string or a VLAN ID.
str
<strings>
A character string specified for <strings> is used for the name of an MA.
vlan <vlan id>
The VLAN ID specified for <vlan id> is used as the name of the MA.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For
<strings> , enclose a character string consisting of no more than 45 characters in
double quotation marks. Specifiable characters are alphanumeric characters and special
characters. To enter a character string that does not include any special characters such
as a space, you do not need to enclose the character string in double quotation marks (").
For details, see Any character string in Specifiable values for parameters .
Specify a value from 1 to 4095 for <vlan id> .
3. Note on using this parameter:
- If a parameter other than
no-present
has been set by using the
domain name
command
and you specify a character string of 44 characters or more for <strings> , the 44th and
subsequent characters are not used in the Short MA Name field in the CCM.
-
<strings> or <vlan id> that has already been set in the same domain cannot be
specified.
Default behavior
<no.> of the
ma vlan-group
command is used for a name of an MA.