Alaxala AX3630S, Software Manual

Page: 847 / 875

40. Error Messages Displayed When Editing the Configuration
819
40.1.8 MAC address table information
Table 40-8: MAC address table error messages
40.1.9 VLAN information
Table 40-9: VLAN error messages
Message Description
Relations between vlan in mac-address-table
static configuration and switchport
configuration are inconsistent.
The
mac-address-table static
VLAN specification and the
switchport
configuration do not match. A VLAN set by using
mac-address-table static
must be specified for
switchport
access
or
switchport trunk allowed vlan
of the interface that has
been set.
Message Description
Cannot change vlan configuration referred
by flow configuration.
The specified vlan configuration cannot be changed because it is specified
by a filter or the QoS configuration.
To change the specified vlan configuration, delete the filter or the QoS
configuration set for the specified vlan configuration first.
Cannot change vlan configuration referred
by QoS configuration. The VLAN configuration cannot be changed. The port type cannot be set
because the parameter that uses VLAN tunneling is set in the QoS flow list
for the Ethernet interface you have set. Delete the QoS flow list for the
Ethernet interface, and then specify the port type.
Cannot delete protocol referred by VLAN
configuration.
You are trying to specify a protocol name to be deleted by using the
protocol
command of the VLAN.
Delete the
protocol
command specification, and then delete the protocol
name.
Can't delete vlan <vlan id> configuration
referred by <value1> configuration.
The specified VLAN cannot be deleted because it is used by another
configuration.
<vlan id> : Indicates the VLAN ID.
<value1> : Configuration for which VLAN is set
Can't set <value1> which is not configured
to use vlan <vlan id> .
The specified VLAN ID has not been set.
<value1> : Configuration for which VLAN ID is set
<vlan id> : Indicates the VLAN ID.
Duplicate translated-tag. The specified translated ID is being used by another VLAN.
Check the following:
• The same translated ID is not used by another VLAN.
• The VLAN ID for which
allowed-vlan
is specified, but
translated-tag
is not specified is not specified.
Inconsistency is found between the
mac-based-vlan static-only and 65 or more
static mac-address entry
The
mac-based-vlan static-only
command cannot be entered or
deleted if 65 or more STATIC MAC addresses have been set.
Inconsistency is found between the
mac-based-vlan static-only and the dot1x
configuration.
An IEEE 802.1X command cannot be executed when the
mac-based-vlan static-only
command has been executed.
Inconsistency is found between the
mac-based-vlan static-only and the fense
configuration.
The VLAN authentication functions cannot be used when the
mac-based-vlan static-only
command has been executed.
Inconsistency is found between the
mac-based-vlan static-only and the
web-authentication configuration.
The Web authentication start command cannot be executed when the
mac-based-vlan static-only
command has been executed.