Alaxala AX3630S, Software Manual

Page: 146 / 875

9. Ethernet
118
Specifies whether to display a log entry when an error occurrence is reported. If a large
number of errors occur continuously, this setting can prevent the log file from being filled with
this log entry. Note that this parameter has no impact on private traps. Use the
snmp-server
host
command to specify whether to issue a private trap. For details, see snmp-server host .
everytime-display
Displays a log entry every time an error occurrence is reported.
one-time-display
Displays a log entry only when an error occurrence is reported for the first time. No log
entries are displayed for subsequent errors. Note, however, that if the applicable port is
restarted, a log entry is displayed when the first error occurrence after the restart is
reported.
off
No log entries are displayed.
1. Default value when this parameter is omitted:
one-time-display
2. Range of values:
everytime-display
,
one-time-display
, or
off
Default behavior
When 15 or more errors occur in a 30-second time interval, the error occurrences are reported.
Displays a log entry only when an error occurrence is reported for the first time. No log entries are
displayed for subsequent errors. Note, however, that if the applicable port is restarted, a log entry
is displayed when the first error occurrence after the restart is reported.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. If you use this command to set the configuration, you must specify at least one parameter.
2. Entering this command disables the settings specified until then. If you want to inherit the old
settings, use this command to specify the applicable parameter again.
Related commands
snmp-server host