Alaxala AX3630S, Software Manual

Page: 416 / 875

18. Access Lists
388
permit (mac access-list extended)
Specifies the conditions by which the MAC filter permits access.
Syntax
To set or change information:
[ <sequence> ] permit { <source mac> <source mac mask> | host <source mac> | any}
{ <destination mac> <destination mac mask> | host <destination mac> | any | bpdu | cdp |
lacp | lldp | oadp | pvst-plus-bpdu | slow-protocol } [ <ethernet type> ] [vlan <vlan id> ]
[user-priority <priority> ]
To delete information:
no <sequence>
Input mode
(config-ext-macl)
Parameters
<sequence>
Specifies the sequence in which filter conditions are applied.
1.
Default value when this parameter is omitted:
10 is set as the initial value if there are no conditions in the access list.
If conditions have been set, the initial value is the maximum value for the application
sequence that has been set plus 10.
Note, however, that if the maximum value for the application sequence is greater than
4294967284, the value cannot be omitted.
2. Range of values:
Specify 1 to 4294967294 in decimal.
{ <source mac> <source mac mask> | host <source mac> | any}
Specifies the source MAC address.
To specify all source MAC addresses, specify
any
.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify
<source mac> <source mac mask> ,
host
<source mac> , or
any
.
Specify the source MAC address for <source mac> .
For <source mac mask> , specify a mask in MAC address format that specifies bits in the
MAC address whose permitted value is arbitrary.
If
host
<source mac> is specified, the filter condition is an exact match of <source
mac> .
If
any
is specified, the source MAC address is not used as a filter condition.
MAC address ( nnnn . nnnn . nnnn ): 0000.0000.0000 to ffff.ffff.ffff (hexadecimal)
{ <destination mac> <destination mac mask> | host <destination mac> | any | bpdu | cdp | lacp |
lldp | oadp | pvst-plus-bpdu | slow-protocol }