Alarko SUPER FIT 24, Assembly, Installation And Operation Instructions

Page: 32 / 56

32
User settings
• Summer / Winter / Only Heating / Off
• CH temperature setting between 30-85°C (standard regime) or between 25-
45°C (reduced regime)
• DHW temperature setting between 30-60°C.
Basic Symbols on LCD Display
Icon 1: DHW mode enabled (Icon
1 blinks when domestic hot
water is in use)
Icon 2: CH mode enabled (Icon 2
blinks when central heating
and pump is in use)
Icon 3: Icon 3 lights while parameter
and service info menu is
used
Icon 4: Icon 4 lights when flame
exists in system.
Icon 5: Reset
When the boiler is switched off at the switch on the control panel,
the word OFF appears on the display. The DHW and central heating
frost protection system, nevertheless, remain enabled. If the boiler
was previously on, it is switched off and the post-ventilation, pump
overrun, circulation pump and three-way valve inactivity protection
functions are enabled.
The remote control, where fitted, remains active and illuminated.
Figure 12. LCD display