AL-KO solo 127448, Original Instructions Manual

Page: 10 / 68

10
E
E
E
Set Throttle lever (E) to
Choking " ".
Do not stop the engine with Throttle lever (E) set at " ". Restarting
the engine will become harder.
If the engine does not stop even if Throttle lever (E) is set at " ", set
it to " ".
・
U
J
V
Q
ON
R
OFF
R
(The engine can start by setting
the lever at " " when it is
warm.)
To start the engine, step one
foot on the step of the
housing, lightly pull Starter
knob (V) and temporarily stop
at a position where you feel
heavy to pull the knob, and
then powerfully pull it from
that position. After that, return
Starter knob (V) slowly.
The engine stalls if the blade lever is gripped with Throttle lever (E)
set at " ".
・
STEP
8.1
Preparation and Inspection Before Operation
8. OPERATION
Place the lawn mower at a level place.
Checking the engine oil amount
Remove Oil tank cap (U), pull
out the oil gauge, and then
insert it not screwing it.
Remove Oil tank cap (U), and
confirm that the oil level is
between the upper and lower
limits of the oil gauge.
Replenish oil if oil level is near
the lower limit.
Firmly close Oil tank cap (U)
after confirmation.
Open Fuel tank cap (J) and refuel
gasoline. Immediately wipe off
with a rag if gasoline is spilt.
Firmly close Fuel tank cap (J)
after refueling.
Confirm that there are no holes and damages with the grass bag. If any,
exchange it with new one specified by us.
Checking the grass bag
Confirm that all the bolts, nuts, and screws are securely tightened.
Confirm that the covers and guards are firmly installed. Remove the
drive shaft cover with a tool.
Confirm that there is no person behind you when pulling Starter
knob (V).
Securely grab Starter knob (V) when you pull it.
Return Starter knob (V) slowly.
・
・
・
Warm up the machine before use.
After the engine has warmed up,
start mowing by setting Throttle
lever (E) to " ".
NOTE
Stop
Release the blade lever and the
drive clutch lever.
Set Throttle lever (E) to " ".
Set Fuel cock (R) to "OFF".
8.2
Start and Stop of Engine
Start
Install Plug cap (Q).
Set Fuel cock (R) to "ON".
Before inspection, be sure to stop the engine and remove the
plug cap.
NOTE
EN
The engine stalls if the blade lever is gripped with Throttle lever (E)
set at " ".
1.
2.
3.
4.
1.
2.
1.
2.
3.
1.
2.
3.
4.
5.
1.
2.
3.
・
Checking each part
Refueling
CAUTION
For Lawn Mower with HONDA engine:
SAE 10W-30 is generally recommended for the entire temperature
range. Select engine oil suitable for the temperature in which the
machine is used, referring to Fig 7.
Recommended Engine Oils
NOTE
No engine oil is filled before the shipment from our factory. Be sure to fill
the engine oil before starting the machine for the first time.
Use engine oil of API Class SJ or later.
Fig. 7
(See Fig. 13)
(See Fig. 11)
Fig. 14
Fig. 6
Fig. 8
Fig. 12
Fig. 13
Fig. 11
Fig. 9
Fig. 10
(See Fig .6)
(See Fig. 8)
(See Fig. 9)
(See Fig. 10)
(See Fig. 11)
(See Fig. 12)
(See Fig. 14)
(See Section 3.5 for precautions during refueling.)
See Section 9.7
for the inspection of the blade.
See the instruction manual of the engine for details.
8.1.4
8.1.5
8.1.3
8.1.1
8.2.1
8.2.2
8.1.2
WARNING
EN